Micro hardness: ~ 750 HV1

Service temperature: max 800°C (1470°F)

Bond strength (EN 582 1994): >70 MPa (>10,000 psi)

Deposition efficiency (EN ISO 17836 2004): ~ 56%

Remarks: The above values depend on the spraying system and parameters used. Therefore measured coating properties may vary from above values.

55396C is mainly spherical powder manufactured by atomising a formulation of self-fluxing nickel based alloy. It has been developed for spraying with the CastoJet CJK5 system which is a High Pressure HVOF using kerosene as liquid fuel. 55396C powder is also suitable for other HVOF systems.
55396C sprayed coatings are dense and smooth with high bond strengths on a wide variety of metallic substrates. They resist exceptionally well to corrosion, low stress abrasion, fretting and particle erosion. It can be used for service temperatures up to 800°C.


  • Pump sleeves
  • Pump screws
  • Wear rings
  • Pump seals
  • Pusher rods
  • Exhaust fans
  • Capstan coiling drum
  • Ball valve
  • Run out table rollers
  • Chrome plating replacement
  • Buffering layer for HVOF carbides coatings

 Inquiry - 55396C